JETCENTRAL MAMMOTH 250 SE TURBINE ENGINE, 56 LBS THRUST

FLAT RATE SHIPPING CHARGE ($60) that applies to all turbine engines

NEW! JetCentral "SE" Smart Electronics ECU System

• Metallic robust HDT
• Safety acceleration flameout prevention
• Self-adjusting features
• Easy fine tuning, do more with less adjustment
• Simple, graphic navigation menus
• Keep track of your telemetry with an easy to use interface
• One-click altitude compensations
• All the information you need in an easy to read display

The JETCENTRAL TURBINE ENGINES are in there own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

• Kerosene Start
• Engine ready for installation, with the newest in ECU's.
• All motors tested at over 6000 ft.

JETCENTRAL MAINTENANCE CYCLE: 

25 HOURS/$250 OVERHAUL FEE + $60 SHIPPING

 SPECIFICATIONS:

• Thurst: 250 Newtons. 25.49 kg – 56. (lbs)
• Idle Thrust: 0.82 kg (1.8 lbs) @ 28,000 RPM
• RPM Range: 28,000 – 108,000 RPM
• Weight: 2.28 Kg (5.02 Lbs) with starter
• Diameter: 124.1 mm (4.89 in)
• Length: 325.40 mm (12.81 in)
• Exhaust Temperature: 500ºC – 700ºC
• Fuel Consumption: 0,81 Lt/min (28.51 oz/min) @ 104,000 RPM

WHAT'S IN THE BOX:

• Turbine Engine with integrated ECU
• Hard Case
• SE POWERPACK Unit
• Clear Fuel Line 4mm
• Clear Kerosene Start Line 3mm
• Clear Fuel Line 6mm
• 3 Cell LiFePo Battery
• Accessory Box
• On/Off Manual Festo Valve (6mm.)
• S-Bus / Power Cable
• USB Flash with Manuals
• SE Hand Data Terminal (HDT)
• JR Style Receiver throttle cable

MANUAL  CLICK HERE